INTERSTELLAR TELEMETRY TRANSMITTER. ----------------------------------- The purpose of this equipment is to send signals to other civilizations in space. The device described here sends numeric codes intended to attend interest at a interstellar spacefaring people. The purpose of the device is to attract alien spacecrafts to Earth. When a spacecraft reach Earth the communications to the crew can be done by other methods. The device is builded around a pyramidical shape that transmits signals on energyplain 3. The wavelength is proportional with the double of the pyramid height. The modulator consist of a organic cylinder who stays vertically inside the pyramid. Around this cylinder there are a coil consisting of copper wire. The numeric codes are sent into the coil who generate magnetic impulses containing the numeric information. The codes are modulated impulses. The number of pulses indicates the number sent. The carrier frequency can be 10 MHz. When this frequency are turned on and off the numeric pulses are generated. The decimals are sent by increasing the "baudrate" by 10 when they are sent. The code who should be sent are burned into a EPROM. The device sends the signals on energyplain 3. That means the speed of light multiplied by itself 4 times. At this speed the signal can reach the Andromeda Galaxy in milliseconds. The device should be placed in nonpopulated arias. The energysource who drive the modulator can be generated by solar cells.